INSTANTLY
MEASURE TOP DIAMETER OF TAPERED HOLES
The
BARCOR CHAMFER GAGE is a precision instrument designed specifically
to measure the top (major) diameter of a chamfer, countersink,
center drill, or tapered hole. Merely press the spring loaded, conically
ground, precision 3-blade Gaging Plunger into the chamfer or countersink
and instantly read the dial in .001" or .01mm/.02mm diameter
increments.
The CHAMFER GAGE
is a direct reading gage. No Setting, Master (Standard) or look-up
chart is required. To "Zero" the gage or check the
setting, press the base of the gage against any flat ground surface and
adjust the dial to read the "Set To" number stamped on the
back.
The CHAMFER GAGE
is available in two angular ranges: 0°-90° for
angles of 90° or less, and 90° - 127° for angles greater
than 90° but less than 127° Models for angles larger than 127° upon
request. The standard BARCOR CHAMFER GAGE is furnished with a hardened
Tool Steel Gaging Plunger. Optional Solid Carbide Gaging Plungers with
a LIFETIME wear guarantee are also offered. Other options include .0001" reading
Super CHAMFER GAGE, External Models, Micrometer
Models, HALF SIZE Models, Electronic Models with SPC capabilities, NIST
(formerly NBS) traceable Setting Masters and Letters of Certification.
MODIFICATIONS OR
SPECIALS ON REQUEST |