INSTANTLY MEASURE SMALL HOLE DIAMETERS
The BARCOR HOLE GAGE is a precision instrument designed to instantly give you a diameter reading in
less than two seconds. Merely insert the precision ground, hardened tool steel Gaging Plunger into the
hole, press the base of the gage firmly against the part and read the dial directly in .001" or .02mm
diameter increments on the dial face.
The HOLE GAGE is
a direct reading gage. No Setting Master (Standard) or look-up
chart is required. To check the setting, press the base of the gage
against any flat ground surface and adjust the dial to read the “Set
To” number stamped on the back.
- 22 Models (11
English/11 Metric) cover a range capacity from .010" (.25mm) to
1.030"
(26.20mm). Individual gages, except for Model 040, have .100" capacity. Model
040 has .030" capacity.
- AGD Group-2 Dial
Indicator with easy to read 2-1/4" Dia. dial.
- Yellow-for-Metric
dial faces to prevent accidental misuse.
- All gages furnished
with foam lined Storage Case and complete operating instructions.
- Optional NBS
Certification available.
- Smallest diameter
available is .004" (.10mm) on specials.
- Optional Setting
Masters available for greater accuracy.
- Available individually
or in convenient sets.
- Super Hole Gage
available with .0001" or .001mm resolution.
- Electronic Hole
Gage with .0001"/.005mm and SPC, also available.
MODIFICATIONS OR
SPECIALS ON REQUEST |